Chromatography Fittings
Waters Corp UV Detector PQ Standard
Kit contains standards appropriate for assessment of HPLC UV systems.1 Ampule (10 mL standard solution contains):- 10.00 mg/L Acetophenone (+/- 5%) Purity > 99%- 10.00 mg/L Propiophenone (+/- 5%) Purity > 99%- 10.00 mg/L Butyrophenone (+/- 5%) Purity > 99%- 3.2 g/L Acetone (+/- 5%) Purity > 99.74%Solution in 60% HPLC Grade Methanol / 40% HPLC Grade Water, volume/volume.
Microsolv Technology Corporation Column End Plugs Blue
End Plugs, for HPLC Columns. Nylon 10-32 Thread. Blue. MicroSolv Brand. 10/PK.
Microsolv Technology Corporation Column End Plugs Yellow
End Plugs, for HPLC Columns. Nylon 10-32 Thread. Yellow. MicroSolv Brand. 10/PK.
Microsolv Technology Corporation Mobile Phase Bottle Red Cap
Bottle, Mobile Phase Reservoir, Safety, Coated Glass, Clear, 2L, Screw Top, GL45 Threads, Open Red Cap. MicroSolv Brand. 1/EA.
Andwin Scientific SYRINGE NEEDLE 20 GAUGE PTFE
The PTFE syringe tubing has a gauge of 20 and a measured length of 24 inches. The PTFE needles must be punctured with a hollow SS needle. Afterwards, the PTFE needle is then threaded through. The SS needle is withdrawn, permitting the septum to seal around the PTFE needle.
Perkin Elmer US LLC Swagelok Stainless Steel Tubing Nut
Swagelok fittings are easy to install and come in a wide variety of configurations. They form gas-tight seals that are resistant to vibration fatigue and capable of withstanding high-pressures, vibrations, and temperature changes. The patented advanced-geometry back ferrule design provides a leak-tight tube connection on all Swagelok stainless steel tube fittings of identical sizes. Quantity: Package of 5 Style: Nut Inner Diameter: 1/4 inch
Elemental Scientific Inc POLYPRO-ST NEBULIZER
PolyPro ST nebulizer. Peristaltic pumped or self-aspirated high performance nebulizer for ICP and ICPMS. Includes two capillaries (100ul/min. & 400ul/min.)
Optimize Technologies EXP2 Replacement Stems, 2.6µL, 2.7µm HALO, C8, 3pk
Specialized features, patented technology, precision engineering and state-of-the-art manufacturing make the new EXP2 Stem Trap an unbeatable choice for ultra high-pressure trapping applications. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP2 Stem Trap seals to 8,700+ psi. Additionally, the product can be wrench tightened to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The new EXP2 design incorporates an integral ferrule into the front-end of the holder so there is no separate ferrule to lose! The replacement stems are also low volume/ low-dispersion, intended for many repeat uses and is available with various bed volume and custom packing options. This product is recommended for nano flow applications. For use with EXP™2 Stem Holder Only